quantitative research uses the following methods of data collection except

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

3.3 Methods of Quantitative Data Collection

Data collection is the process of gathering information for research purposes. Data collection methods in quantitative research refer to the techniques or tools used to collect data from participants or units in a study. Data are the most important asset for any researcher because they provide the researcher with the knowledge necessary to confirm or refute their research hypothesis. 2 The choice of data collection method will depend on the research question, the study design, the type of data to be collected, and the available resources. There are two main types of data which are primary data and secondary data. 34 These data types and their examples are discussed below.

Data Sources

Secondary data

Secondary data is data that is already in existence and was collected for other purposes and not for the sole purpose of a researcher’s project. 34 These pre-existing data include data from surveys, administrative records, medical records, or other sources (databases, internet). Examples of these data sources include census data, vital registration (birth and death), registries of notifiable diseases, hospital data and health-related data such as the national health survey data and national drug strategy household survey. 2 While secondary data are population-based, quicker to access, and cheaper to collect than primary data, there are some drawbacks to this data source. Potential disadvantages include accuracy of the data, completeness, and appropriateness of the data, given that the data was collected for an alternative purpose. 2 

Primary data

Primary data is collected directly from the study participants and used expressly for research purposes. 34 The data collected is specifically targeted at the research question, hypothesis and aims. Examples of primary data include observations and surveys (questionnaires). 34

• Observations: In quantitative research, observations entail systematically watching and recording the events or behaviours of interest. Observations can be used to collect information on variables that may be difficult to quantify through self-reported methods. Observations, for example, can be used to obtain clinical measurements involving the use of standardised instruments or tools to measure physical, cognitive, or other variables of interest. Other examples include experimental or laboratory studies that necessitate the collection of physiological data such as blood pressure, heart rate, urine, e.t.c. 2
• Surveys:  While observations are useful data collection methods, surveys are more commonly used data collection methods in healthcare research. 2, 34 Surveys or questionnaires are designed to seek specific information such as knowledge, beliefs, attitudes and behaviour from respondents. 2, 34 Surveys can be employed as a single research tool (as in a cross-sectional survey) or as part of clinical trials or epidemiological studies. 2, 34   They can be administered face-to-face, via telephone, paper-based, computer-based or a combination of the different methods. 2 Figure 3.7 outlines some advantages and disadvantages of questionnaires/surveys.

Designing a survey/questionnaire

A questionnaire is a research tool that consists of questions that are designed to collect information and generate statistical data from a specified group of people (target population). There are two main considerations in relation to design principles, and these are (1) content and (2) layout and sequence. 36 In terms of content, it is important to review the literature for related validated survey tools, as this saves time and allows for the comparison of results. Additionally, researchers need to minimise complexity by using simple direct language, including only relevant and accurate questions, with no jargon. 36 Concerning layout and sequence, there should be a logical flow of questions from general and easier to more sensitive ones, and the questionnaire should be as short as possible and NOT overcrowded. 36 The following steps can be used to develop a survey/ questionnaire.

Question Formats

Open and closed-ended questions are the two main types of question formats. 2   Open-ended questions allow respondents to express their thoughts without being constrained by the available options. 2, 38 Open-ended questions are chosen if the options are many and the range of answers is unknown. 38

On the other hand, closed-ended questions provide respondents with alternatives and require that they select one or more options from a list. 38 The question type is favoured if the choices are few and the range of responses is well-known. 38 However, other question formats may be used when assessing things on a continuum, like attitudes and behaviour. These variables can be considered using rating scales like visual analogue scales, adjectival scales and Likert scales. 2 Figure 3.8 presents a visual representation of some question types, including open-ended, closed-ended, likert rating scales, symbols, and visual Analogue Scales.

It is important to carefully craft survey questions to ensure that they are clear, unbiased and accurately capture the information researchers seek to gather. Clearly written questions with consistency in wording increase the likelihood of obtaining accurate and reliable data. Poorly crafted questions, on the other hand, may sway respondents to answer in a particular way which can undermine the validity of the survey. The following are some general guidelines for question wording. 39

Be concise and clear: Ask succinct and precise questions, and do not use ambiguous and vague words. For example, do not ask a patient, “ how was your clinic experience ? What do you mean by clinic experience? Are you referring to their interactions with the nurses, doctors or physiotherapists?

Instead, consider using a better-phrased question such as “ please rate your experience with the doctor during your visit today ”.

Avoid double-barrelled questions. Some questions may have dual questions, for example: Do you think you should eat less and exercise more?

Instead, ask:

• Do you think you should eat less?
• Do you think you should exercise more?

Steer clear of questions that involve negatives: Negatively worded questions can be confusing. For example, I find it difficult to fall asleep unless I take sleeping pills .

A better phrase is, “sleeping pills make it easy for me to fall asleep.”

Ask for specific answers. It is better to ask for more precise information. For example, “what is your age in years?________ Is preferable to -Which age category do you belong to?

☐  <18 years

☐ 18 – 25 years

☐ 25 – 35 years

☐ > 35 years

The options above will give more room for errors because the options are not mutually exclusive (there are overlaps) and not exhaustive (there are older age groups above 35 years).

Avoid leading questions. Leading questions reduces objectivity and make respondents answer in a particular way. Questions related to values and beliefs should be neutrally phrased. For example, the question below is worded in a leading way – Conducting research is challenging. Does research training help to prepare you for your research project?

An appropriate alternative: Research training prepares me for my research project.

Strongly agree           Agree                    Disagree              Strongly disagree

An Introduction to Research Methods for Undergraduate Health Profession Students Copyright © 2023 by Faith Alele and Bunmi Malau-Aduli is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License , except where otherwise noted.

Global Encyclopedia of Public Administration, Public Policy, and Governance pp 1–6 Cite as

Quantitative Methods

• Juwel Rana 2 , 3 , 4 ,
• Patricia Luna Gutierrez 5 &
• John C. Oldroyd 6  
• Living reference work entry
• First Online: 11 June 2021

350 Accesses

1 Citations

Quantitative analysis ; Quantitative research methods ; Study design

Quantitative method is the collection and analysis of numerical data to answer scientific research questions. Quantitative method is used to summarize, average, find patterns, make predictions, and test causal associations as well as generalizing results to wider populations. It allows us to quantify effect sizes, determine the strength of associations, rank priorities, and weigh the strength of evidence of effectiveness.

Introduction

This entry aims to introduce the most common ways to use numbers and statistics to describe variables, establish relationships among variables, and build numerical understanding of a topic. In general, the quantitative research process uses a deductive approach (Neuman 2014 ; Leavy 2017 ), extrapolating from a particular case to the general situation (Babones 2016 ).

In practical ways, quantitative methods are an approach to studying a research topic. In research, the...

This is a preview of subscription content, log in via an institution .

Babones S (2016) Interpretive quantitative methods for the social sciences. Sociology. https://doi.org/10.1177/0038038515583637

Balnaves M, Caputi P (2001) Introduction to quantitative research methods: an investigative approach. Sage, London

Book   Google Scholar  

Brenner PS (2020) Understanding survey methodology: sociological theory and applications. Springer, Boston

Google Scholar  

Creswell JW (2014) Research design: qualitative, quantitative, and mixed methods approaches. Sage, London

Leavy P (2017) Research design. The Gilford Press, New York

Mertens W, Pugliese A, Recker J (2018) Quantitative data analysis, research methods: information, systems, and contexts: second edition. https://doi.org/10.1016/B978-0-08-102220-7.00018-2

Neuman LW (2014) Social research methods: qualitative and quantitative approaches. Pearson Education Limited, Edinburgh

Treiman DJ (2009) Quantitative data analysis: doing social research to test ideas. Jossey-Bass, San Francisco

Download references

Author information

Authors and affiliations.

Department of Public Health, School of Health and Life Sciences, North South University, Dhaka, Bangladesh

Department of Biostatistics and Epidemiology, School of Health and Health Sciences, University of Massachusetts Amherst, MA, USA

Department of Research and Innovation, South Asia Institute for Social Transformation (SAIST), Dhaka, Bangladesh

Independent Researcher, Masatepe, Nicaragua

Patricia Luna Gutierrez

School of Behavioral and Health Sciences, Australian Catholic University, Fitzroy, VIC, Australia

John C. Oldroyd

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to Juwel Rana .

Editor information

Editors and affiliations.

Florida Atlantic University, Boca Raton, FL, USA

Ali Farazmand

Rights and permissions

Reprints and permissions

Copyright information

© 2021 Springer Nature Switzerland AG

About this entry

Cite this entry.

Rana, J., Gutierrez, P.L., Oldroyd, J.C. (2021). Quantitative Methods. In: Farazmand, A. (eds) Global Encyclopedia of Public Administration, Public Policy, and Governance. Springer, Cham. https://doi.org/10.1007/978-3-319-31816-5_460-1

Download citation

DOI : https://doi.org/10.1007/978-3-319-31816-5_460-1

Received : 31 January 2021

Accepted : 14 February 2021

Published : 11 June 2021

Publisher Name : Springer, Cham

Print ISBN : 978-3-319-31816-5

Online ISBN : 978-3-319-31816-5

eBook Packages : Springer Reference Economics and Finance Reference Module Humanities and Social Sciences Reference Module Business, Economics and Social Sciences

• Publish with us

Policies and ethics

• Find a journal
• Track your research

• Skip to main content
• Skip to primary sidebar
• Skip to footer
• QuestionPro

• Solutions Industries Gaming Automotive Sports and events Education Government Travel & Hospitality Financial Services Healthcare Cannabis Technology Use Case NPS+ Communities Audience Contactless surveys Mobile LivePolls Member Experience GDPR Positive People Science 360 Feedback Surveys
• Resources Blog eBooks Survey Templates Case Studies Training Help center

Home Market Research

Quantitative Data Collection: Best 5 methods

In contrast to qualitative data , quantitative data collection is everything about figures and numbers. Researchers often rely on quantitative data when they intend to quantify attributes, attitudes, behaviors, and other defined variables with a motive to either back or oppose the hypothesis of a specific phenomenon by contextualizing the data obtained via surveying or interviewing the study sample.

Content Index

What is Quantitative Data Collection?

Importance of quantitative data collection, probability sampling, surveys/questionnaires, observations, document review in quantitative data collection.

Quantitative data collection refers to the collection of numerical data that can be analyzed using statistical methods. This type of data collection is often used in surveys, experiments, and other research methods. It measure variables and establish relationships between variables. The data collected through quantitative methods is typically in the form of numbers, such as response frequencies, means, and standard deviations, and can be analyzed using statistical software.

LEARN ABOUT: Research Process Steps

As a researcher, you do have the option to opt either for data collection online or use traditional data collection methods via appropriate research. Quantitative data collection is important for several reasons:

• Objectivity: Quantitative data collection provides objective and verifiable information, as the data is collected in a systematic and standardized manner.
• Generalizability: The results from quantitative data collection can be generalized to a larger population, making it an effective way to study large groups of people.
• Precision: Numerical data allows for precise measurement and unit of analysis , providing more accurate results than other data collection forms.
• Hypothesis testing: Quantitative data collection allows for testing hypotheses and theories, leading to a better understanding of the relationships between variables.
• Comparison: Quantitative data collection allows for data comparison and analysis. It can be useful in making decisions and identifying trends or patterns.
• Replicability: The numerical nature of quantitative data makes it easier to replicate research results. It is essential for building knowledge in a particular field.

LEARN ABOUT: Level of Analysis

Overall, quantitative data collection provides valuable information for understanding complex phenomena and making informed decisions based on empirical evidence.

LEARN ABOUT: Best Data Collection Tools

Methods used for Quantitative Data Collection

A data that can be counted or expressed in numerical’s constitute the quantitative data. It is commonly used to study the events or levels of concurrence. And is collected through a Structured Question & structured questionnaire asking questions starting with “how much” or “how many.” As the quantitative data is numerical, it represents both definitive and objective data. Furthermore, quantitative information is much sorted for statistical analysis and mathematical analysis, making it possible to illustrate it in the form of charts and graphs.

Discrete and continuous are the two major categories of quantitative data where discreet data have finite numbers and the constant data values falling on a continuum possessing the possibility to have fractions or decimals. If research is conducted to find out the number of vehicles owned by the American household, then we get a whole number, which is an excellent example of discrete data. When research is limited to the study of physical measurements of the population like height, weight, age, or distance, then the result is an excellent example of continuous data.

Any traditional or online data collection method that helps in gathering numerical data is a proven method of collecting quantitative data.

LEARN ABOUT: Survey Sampling

There are four significant types of probability sampling:

• Simple random sampling : More often, the targeted demographic is chosen for inclusion in the sample. 
• Cluster sampling : Cluster sampling is a technique in which a population is divided into smaller groups or clusters, and a random sample of these clusters is selected. This method is used when it is impractical or expensive to obtain a random sample from the entire population . 
• Systematic sampling : Any of the targeted demographic would be included in the sample, but only the first unit for inclusion in the sample is selected randomly, rest are selected in the ordered fashion as if one out of every ten people on the list .
• Stratified sampling : It allows selecting each unit from a particular group of the targeted audience while creating a sample. It is useful when the researchers are selective about including a specific set of people in the sample, i.e., only males or females, managers or executives, people working within a particular industry.

Interviewing people is a standard method used for data collection . However, the interviews conducted to collect quantitative data are more structured, wherein the researchers ask only a standard set of online questionnaires and nothing more than that.

There are three major types of interviews conducted for data collection 

• Telephone interviews: For years, telephone interviews ruled the charts of data collection methods. Nowadays, there is a significant rise in conducting video interviews using the internet, Skype, or similar online video calling platforms. 
• Face-to-face interviews: It is a proven technique to collect data directly from the participants. It helps in acquiring quality data as it provides a scope to ask detailed questions and probing further to collect rich and informative data. Literacy requirements of the participant are irrelevant as F2F surveys offer ample opportunities to collect non-verbal data through observation or to explore complex and unknown issues. Although it can be an expensive and time-consuming method, the response rates for F2F interviews are often higher. 
• Computer-Assisted Personal Interviewing (CAPI): It is nothing but a similar setup of the face-to-face interview where the interviewer carries a desktop or laptop along with him at the time of interview to upload the data obtained from the interview directly into the database. CAPI saves a lot of time in updating and processing the data and also makes the entire process paperless as the interviewer does not carry a bunch of papers and questionnaires.

There are two significant types of survey questionnaires used to collect online data for quantitative market research.

• Web-based questionnaire : This is one of the ruling and most trusted methods for internet-based research or online research. In a web-based questionnaire, the receive an email containing the survey link, clicking on which takes the respondent to a secure online survey tool from where he/she can take the survey or fill in the survey questionnaire. Being a cost-efficient, quicker, and having a wider reach, web-based surveys are more preferred by the researchers. The primary benefit of a web-based questionnaire is flexibility. Respondents are free to take the survey in their free time using either a desktop, laptop, tablet, or mobile.
• Mail Questionnaire : In a mail questionnaire, the survey is mailed out to a host of the sample population, enabling the researcher to connect with a wide range of audiences. The mail questionnaire typically consists of a packet containing a cover sheet that introduces the audience about the type of research and reason why it is being conducted along with a prepaid return to collect data online. Although the mail questionnaire has a higher churn rate compared to other quantitative data collection methods, adding certain perks such as reminders and incentives to complete the survey help in drastically improving the churn rate. One of the major benefits of the mail questionnaire is all the responses are anonymous, and respondents are allowed to take as much time as they want to complete the survey and be completely honest about the answer without the fear of prejudice.

LEARN ABOUT: Steps in Qualitative Research

As the name suggests, it is a pretty simple and straightforward method of collecting quantitative data. In this method, researchers collect quantitative data through systematic observations by using techniques like counting the number of people present at the specific event at a particular time and a particular venue or number of people attending the event in a designated place. More often, for quantitative data collection, the researchers have a naturalistic observation approach. It needs keen observation skills and senses for getting the numerical data about the “what” and not about “why” and ”how.”

Naturalistic observation is used to collect both types of data; qualitative and quantitative. However, structured observation is more used to collect quantitative rather than qualitative data collection .

• Structured observation: In this type of observation method, the researcher has to make careful observations of one or more specific behaviors in a more comprehensive or structured setting compared to naturalistic or participant observation . In a structured observation, the researchers, rather than observing everything, focus only on very specific behaviors of interest. It allows them to quantify the behaviors they are observing. When the qualitative observations require a judgment on the part of the observers – it is often described as coding, which requires a clearly defining a set of target behaviors.

Document review is a process used to collect data after reviewing the existing documents. It is an efficient and effective way of gathering data as documents are manageable. Those are the practical resource to get qualified data from the past. Apart from strengthening and supporting the research by providing supplementary research data document review has emerged as one of the beneficial methods to gather quantitative research data.

Three primary document types are being analyzed for collecting supporting quantitative research data.

• Public Records: Under this document review, official, ongoing records of an organization are analyzed for further research. For example, annual reports policy manuals, student activities, game activities in the university, etc.
• Personal Documents: In contrast to public documents, this type of document review deals with individual personal accounts of individuals’ actions, behavior, health, physique, etc. For example, the height and weight of the students, distance students are traveling to attend the school, etc.
• Physical Evidence:  Physical evidence or physical documents deal with previous achievements of an individual or of an organization in terms of monetary and scalable growth.

LEARN ABOUT: 12 Best Tools for Researchers

Quantitative data is not about convergent reasoning, but it is about divergent thinking. It deals with the numerical, logic, and an objective stance, by focusing on numeric and unchanging data. More often, data collection methods are used to collect quantitative research data, and the results are dependent on the larger sample sizes that are commonly representing the population researcher intend to study.

Although there are many other methods to collect quantitative data. Those mentioned above probability sampling, interviews, questionnaire observation, and document review are the most common and widely used methods for data collection.

With QuestionPro, you can precise results, and data analysis . QuestionPro provides the opportunity to collect data from a large number of participants. It increases the representativeness of the sample and providing more accurate results.

FREE TRIAL         LEARN MORE

MORE LIKE THIS

Customer Communication Tool: Types, Methods, Uses, & Tools

Apr 23, 2024

Top 12 Sentiment Analysis Tools for Understanding Emotions

QuestionPro BI: From Research Data to Actionable Dashboards

Apr 22, 2024

21 Best Customer Experience Management Software in 2024

Other categories.

• Academic Research
• Artificial Intelligence
• Assessments
• Brand Awareness
• Case Studies
• Communities
• Consumer Insights
• Customer effort score
• Customer Engagement
• Customer Experience
• Customer Loyalty
• Customer Research
• Customer Satisfaction
• Employee Benefits
• Employee Engagement
• Employee Retention
• Friday Five
• General Data Protection Regulation
• Insights Hub
• Life@QuestionPro
• Market Research
• Mobile diaries
• Mobile Surveys
• New Features
• Online Communities
• Question Types
• Questionnaire
• QuestionPro Products
• Release Notes
• Research Tools and Apps
• Revenue at Risk
• Survey Templates
• Training Tips
• Uncategorized
• Video Learning Series
• What’s Coming Up
• Workforce Intelligence

Quantitative Data Collection Methods

Quantitative research methods describe and measure the level of occurrences on the basis of numbers and calculations. Moreover, the questions of “how many?” and “how often?” are often asked in quantitative studies. Accordingly, quantitative data collection methods are based on numbers and mathematical calculations.

Quantitative research can be described as ‘entailing the collection of numerical data and exhibiting the view of relationship between theory and research as deductive, a predilection for natural science approach, and as having an objectivist conception of social reality’ [1] . In other words, quantitative studies mainly examine relationships between numerically measured variables with the application of statistical techniques.

Quantitative data collection methods are based on random sampling and structured data collection instruments. Findings of quantitative studies are usually easy to present, summarize, compare and generalize.

Qualitative studies , on the contrary, are usually based on non-random sampling methods and use non-quantifiable data such as words, feelings, emotions ect. Table below illustrates the main differences between qualitative and quantitative data collection and research methods:

Main differences between quantitative and qualitative methods

The most popular quantitative data collection methods include the following:

• Face-to-face interviews;
• Telephone interviews;
• Computer-Assisted Personal Interviewing (CAPI).
• Internet-based questionnaire;
• Mail questionnaire;
• Face-to-face survey.
• Observations . The type of observation that can be used to collect quantitative data is systematic, where the researcher counts the number of occurrences of phenomenon.

My  e-book,  The Ultimate Guide to Writing a Dissertation in Business Studies: a step by step approach  contains a detailed, yet simple explanation of quantitative methods. The e-book explains all stages of the research process starting from the selection of the research area to writing personal reflection. Important elements of dissertations such as research philosophy, research approach, research design, methods of data collection and data analysis are explained in simple words. John Dudovskiy

[1] Bryman, A. & Bell, E. (2015) “Business Research Methods” 4 th edition,  p.160

Quantitative and Qualitative Research

• I NEED TO . . .

What is Quantitative Research?

• What is Qualitative Research?
• Quantitative vs Qualitative
• Step 1: Accessing CINAHL
• Step 2: Create a Keyword Search
• Step 3: Create a Subject Heading Search
• Step 4: Repeat Steps 1-3 for Second Concept
• Step 5: Repeat Steps 1-3 for Quantitative Terms
• Step 6: Combining All Searches
• Step 7: Adding Limiters
• Step 8: Save Your Search!
• What Kind of Article is This?
• More Research Help This link opens in a new window

Quantitative methodology is the dominant research framework in the social sciences. It refers to a set of strategies, techniques and assumptions used to study psychological, social and economic processes through the exploration of numeric patterns . Quantitative research gathers a range of numeric data. Some of the numeric data is intrinsically quantitative (e.g. personal income), while in other cases the numeric structure is  imposed (e.g. ‘On a scale from 1 to 10, how depressed did you feel last week?’). The collection of quantitative information allows researchers to conduct simple to extremely sophisticated statistical analyses that aggregate the data (e.g. averages, percentages), show relationships among the data (e.g. ‘Students with lower grade point averages tend to score lower on a depression scale’) or compare across aggregated data (e.g. the USA has a higher gross domestic product than Spain). Quantitative research includes methodologies such as questionnaires, structured observations or experiments and stands in contrast to qualitative research. Qualitative research involves the collection and analysis of narratives and/or open-ended observations through methodologies such as interviews, focus groups or ethnographies.

Coghlan, D., Brydon-Miller, M. (2014).  The SAGE encyclopedia of action research  (Vols. 1-2). London, : SAGE Publications Ltd doi: 10.4135/9781446294406

What is the purpose of quantitative research?

The purpose of quantitative research is to generate knowledge and create understanding about the social world. Quantitative research is used by social scientists, including communication researchers, to observe phenomena or occurrences affecting individuals. Social scientists are concerned with the study of people. Quantitative research is a way to learn about a particular group of people, known as a sample population. Using scientific inquiry, quantitative research relies on data that are observed or measured to examine questions about the sample population.

Allen, M. (2017).  The SAGE encyclopedia of communication research methods  (Vols. 1-4). Thousand Oaks, CA: SAGE Publications, Inc doi: 10.4135/9781483381411

How do I know if the study is a quantitative design?  What type of quantitative study is it?

Quantitative Research Designs: Descriptive non-experimental, Quasi-experimental or Experimental?

Studies do not always explicitly state what kind of research design is being used.  You will need to know how to decipher which design type is used.  The following video will help you determine the quantitative design type.

• << Previous: I NEED TO . . .
• Next: What is Qualitative Research? >>
• Last Updated: Dec 8, 2023 10:05 PM
• URL: https://libguides.uta.edu/quantitative_and_qualitative_research

University of Texas Arlington Libraries 702 Planetarium Place · Arlington, TX 76019 · 817-272-3000

• Internet Privacy
• Accessibility
• Problems with a guide? Contact Us.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Methodology
• Data Collection Methods | Step-by-Step Guide & Examples

Data Collection Methods | Step-by-Step Guide & Examples

Published on 4 May 2022 by Pritha Bhandari .

Data collection is a systematic process of gathering observations or measurements. Whether you are performing research for business, governmental, or academic purposes, data collection allows you to gain first-hand knowledge and original insights into your research problem .

While methods and aims may differ between fields, the overall process of data collection remains largely the same. Before you begin collecting data, you need to consider:

• The  aim of the research
• The type of data that you will collect
• The methods and procedures you will use to collect, store, and process the data

To collect high-quality data that is relevant to your purposes, follow these four steps.

Table of contents

Step 1: define the aim of your research, step 2: choose your data collection method, step 3: plan your data collection procedures, step 4: collect the data, frequently asked questions about data collection.

Before you start the process of data collection, you need to identify exactly what you want to achieve. You can start by writing a problem statement : what is the practical or scientific issue that you want to address, and why does it matter?

Next, formulate one or more research questions that precisely define what you want to find out. Depending on your research questions, you might need to collect quantitative or qualitative data :

• Quantitative data is expressed in numbers and graphs and is analysed through statistical methods .
• Qualitative data is expressed in words and analysed through interpretations and categorisations.

If your aim is to test a hypothesis , measure something precisely, or gain large-scale statistical insights, collect quantitative data. If your aim is to explore ideas, understand experiences, or gain detailed insights into a specific context, collect qualitative data.

If you have several aims, you can use a mixed methods approach that collects both types of data.

• Your first aim is to assess whether there are significant differences in perceptions of managers across different departments and office locations.
• Your second aim is to gather meaningful feedback from employees to explore new ideas for how managers can improve.

Prevent plagiarism, run a free check.

Based on the data you want to collect, decide which method is best suited for your research.

• Experimental research is primarily a quantitative method.
• Interviews , focus groups , and ethnographies are qualitative methods.
• Surveys , observations, archival research, and secondary data collection can be quantitative or qualitative methods.

Carefully consider what method you will use to gather data that helps you directly answer your research questions.

When you know which method(s) you are using, you need to plan exactly how you will implement them. What procedures will you follow to make accurate observations or measurements of the variables you are interested in?

For instance, if you’re conducting surveys or interviews, decide what form the questions will take; if you’re conducting an experiment, make decisions about your experimental design .

Operationalisation

Sometimes your variables can be measured directly: for example, you can collect data on the average age of employees simply by asking for dates of birth. However, often you’ll be interested in collecting data on more abstract concepts or variables that can’t be directly observed.

Operationalisation means turning abstract conceptual ideas into measurable observations. When planning how you will collect data, you need to translate the conceptual definition of what you want to study into the operational definition of what you will actually measure.

• You ask managers to rate their own leadership skills on 5-point scales assessing the ability to delegate, decisiveness, and dependability.
• You ask their direct employees to provide anonymous feedback on the managers regarding the same topics.

You may need to develop a sampling plan to obtain data systematically. This involves defining a population , the group you want to draw conclusions about, and a sample, the group you will actually collect data from.

Your sampling method will determine how you recruit participants or obtain measurements for your study. To decide on a sampling method you will need to consider factors like the required sample size, accessibility of the sample, and time frame of the data collection.

Standardising procedures

If multiple researchers are involved, write a detailed manual to standardise data collection procedures in your study.

This means laying out specific step-by-step instructions so that everyone in your research team collects data in a consistent way – for example, by conducting experiments under the same conditions and using objective criteria to record and categorise observations.

This helps ensure the reliability of your data, and you can also use it to replicate the study in the future.

Creating a data management plan

Before beginning data collection, you should also decide how you will organise and store your data.

• If you are collecting data from people, you will likely need to anonymise and safeguard the data to prevent leaks of sensitive information (e.g. names or identity numbers).
• If you are collecting data via interviews or pencil-and-paper formats, you will need to perform transcriptions or data entry in systematic ways to minimise distortion.
• You can prevent loss of data by having an organisation system that is routinely backed up.

Finally, you can implement your chosen methods to measure or observe the variables you are interested in.

The closed-ended questions ask participants to rate their manager’s leadership skills on scales from 1 to 5. The data produced is numerical and can be statistically analysed for averages and patterns.

To ensure that high-quality data is recorded in a systematic way, here are some best practices:

• Record all relevant information as and when you obtain data. For example, note down whether or how lab equipment is recalibrated during an experimental study.
• Double-check manual data entry for errors.
• If you collect quantitative data, you can assess the reliability and validity to get an indication of your data quality.

Data collection is the systematic process by which observations or measurements are gathered in research. It is used in many different contexts by academics, governments, businesses, and other organisations.

When conducting research, collecting original data has significant advantages:

• You can tailor data collection to your specific research aims (e.g., understanding the needs of your consumers or user testing your website).
• You can control and standardise the process for high reliability and validity (e.g., choosing appropriate measurements and sampling methods ).

However, there are also some drawbacks: data collection can be time-consuming, labour-intensive, and expensive. In some cases, it’s more efficient to use secondary data that has already been collected by someone else, but the data might be less reliable.

Quantitative research deals with numbers and statistics, while qualitative research deals with words and meanings.

Quantitative methods allow you to test a hypothesis by systematically collecting and analysing data, while qualitative methods allow you to explore ideas and experiences in depth.

Reliability and validity are both about how well a method measures something:

• Reliability refers to the  consistency of a measure (whether the results can be reproduced under the same conditions).
• Validity   refers to the  accuracy of a measure (whether the results really do represent what they are supposed to measure).

If you are doing experimental research , you also have to consider the internal and external validity of your experiment.

In mixed methods research , you use both qualitative and quantitative data collection and analysis methods to answer your research question .

Operationalisation means turning abstract conceptual ideas into measurable observations.

For example, the concept of social anxiety isn’t directly observable, but it can be operationally defined in terms of self-rating scores, behavioural avoidance of crowded places, or physical anxiety symptoms in social situations.

Before collecting data , it’s important to consider how you will operationalise the variables that you want to measure.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

Bhandari, P. (2022, May 04). Data Collection Methods | Step-by-Step Guide & Examples. Scribbr. Retrieved 22 April 2024, from https://www.scribbr.co.uk/research-methods/data-collection-guide/

Is this article helpful?

Pritha Bhandari

Other students also liked, qualitative vs quantitative research | examples & methods, triangulation in research | guide, types, examples, what is a conceptual framework | tips & examples.

• USC Libraries
• Research Guides

Organizing Your Social Sciences Research Paper

• Quantitative Methods
• Purpose of Guide
• Design Flaws to Avoid
• Independent and Dependent Variables
• Glossary of Research Terms
• Reading Research Effectively
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Applying Critical Thinking
• Choosing a Title
• Making an Outline
• Paragraph Development
• Research Process Video Series
• Executive Summary
• The C.A.R.S. Model
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Primary Sources
• Secondary Sources
• Tiertiary Sources
• Scholarly vs. Popular Publications
• Qualitative Methods
• Insiderness
• Using Non-Textual Elements
• Limitations of the Study
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Generative AI and Writing
• USC Libraries Tutorials and Other Guides
• Bibliography

Quantitative methods emphasize objective measurements and the statistical, mathematical, or numerical analysis of data collected through polls, questionnaires, and surveys, or by manipulating pre-existing statistical data using computational techniques . Quantitative research focuses on gathering numerical data and generalizing it across groups of people or to explain a particular phenomenon.

Babbie, Earl R. The Practice of Social Research . 12th ed. Belmont, CA: Wadsworth Cengage, 2010; Muijs, Daniel. Doing Quantitative Research in Education with SPSS . 2nd edition. London: SAGE Publications, 2010.

Need Help Locating Statistics?

Resources for locating data and statistics can be found here:

Statistics & Data Research Guide

Characteristics of Quantitative Research

Your goal in conducting quantitative research study is to determine the relationship between one thing [an independent variable] and another [a dependent or outcome variable] within a population. Quantitative research designs are either descriptive [subjects usually measured once] or experimental [subjects measured before and after a treatment]. A descriptive study establishes only associations between variables; an experimental study establishes causality.

Quantitative research deals in numbers, logic, and an objective stance. Quantitative research focuses on numeric and unchanging data and detailed, convergent reasoning rather than divergent reasoning [i.e., the generation of a variety of ideas about a research problem in a spontaneous, free-flowing manner].

Its main characteristics are :

• The data is usually gathered using structured research instruments.
• The results are based on larger sample sizes that are representative of the population.
• The research study can usually be replicated or repeated, given its high reliability.
• Researcher has a clearly defined research question to which objective answers are sought.
• All aspects of the study are carefully designed before data is collected.
• Data are in the form of numbers and statistics, often arranged in tables, charts, figures, or other non-textual forms.
• Project can be used to generalize concepts more widely, predict future results, or investigate causal relationships.
• Researcher uses tools, such as questionnaires or computer software, to collect numerical data.

The overarching aim of a quantitative research study is to classify features, count them, and construct statistical models in an attempt to explain what is observed.

  Things to keep in mind when reporting the results of a study using quantitative methods :

• Explain the data collected and their statistical treatment as well as all relevant results in relation to the research problem you are investigating. Interpretation of results is not appropriate in this section.
• Report unanticipated events that occurred during your data collection. Explain how the actual analysis differs from the planned analysis. Explain your handling of missing data and why any missing data does not undermine the validity of your analysis.
• Explain the techniques you used to "clean" your data set.
• Choose a minimally sufficient statistical procedure ; provide a rationale for its use and a reference for it. Specify any computer programs used.
• Describe the assumptions for each procedure and the steps you took to ensure that they were not violated.
• When using inferential statistics , provide the descriptive statistics, confidence intervals, and sample sizes for each variable as well as the value of the test statistic, its direction, the degrees of freedom, and the significance level [report the actual p value].
• Avoid inferring causality , particularly in nonrandomized designs or without further experimentation.
• Use tables to provide exact values ; use figures to convey global effects. Keep figures small in size; include graphic representations of confidence intervals whenever possible.
• Always tell the reader what to look for in tables and figures .

NOTE:   When using pre-existing statistical data gathered and made available by anyone other than yourself [e.g., government agency], you still must report on the methods that were used to gather the data and describe any missing data that exists and, if there is any, provide a clear explanation why the missing data does not undermine the validity of your final analysis.

Babbie, Earl R. The Practice of Social Research . 12th ed. Belmont, CA: Wadsworth Cengage, 2010; Brians, Craig Leonard et al. Empirical Political Analysis: Quantitative and Qualitative Research Methods . 8th ed. Boston, MA: Longman, 2011; McNabb, David E. Research Methods in Public Administration and Nonprofit Management: Quantitative and Qualitative Approaches . 2nd ed. Armonk, NY: M.E. Sharpe, 2008; Quantitative Research Methods. Writing@CSU. Colorado State University; Singh, Kultar. Quantitative Social Research Methods . Los Angeles, CA: Sage, 2007.

Basic Research Design for Quantitative Studies

Before designing a quantitative research study, you must decide whether it will be descriptive or experimental because this will dictate how you gather, analyze, and interpret the results. A descriptive study is governed by the following rules: subjects are generally measured once; the intention is to only establish associations between variables; and, the study may include a sample population of hundreds or thousands of subjects to ensure that a valid estimate of a generalized relationship between variables has been obtained. An experimental design includes subjects measured before and after a particular treatment, the sample population may be very small and purposefully chosen, and it is intended to establish causality between variables. Introduction The introduction to a quantitative study is usually written in the present tense and from the third person point of view. It covers the following information:

• Identifies the research problem -- as with any academic study, you must state clearly and concisely the research problem being investigated.
• Reviews the literature -- review scholarship on the topic, synthesizing key themes and, if necessary, noting studies that have used similar methods of inquiry and analysis. Note where key gaps exist and how your study helps to fill these gaps or clarifies existing knowledge.
• Describes the theoretical framework -- provide an outline of the theory or hypothesis underpinning your study. If necessary, define unfamiliar or complex terms, concepts, or ideas and provide the appropriate background information to place the research problem in proper context [e.g., historical, cultural, economic, etc.].

Methodology The methods section of a quantitative study should describe how each objective of your study will be achieved. Be sure to provide enough detail to enable the reader can make an informed assessment of the methods being used to obtain results associated with the research problem. The methods section should be presented in the past tense.

• Study population and sampling -- where did the data come from; how robust is it; note where gaps exist or what was excluded. Note the procedures used for their selection;
• Data collection – describe the tools and methods used to collect information and identify the variables being measured; describe the methods used to obtain the data; and, note if the data was pre-existing [i.e., government data] or you gathered it yourself. If you gathered it yourself, describe what type of instrument you used and why. Note that no data set is perfect--describe any limitations in methods of gathering data.
• Data analysis -- describe the procedures for processing and analyzing the data. If appropriate, describe the specific instruments of analysis used to study each research objective, including mathematical techniques and the type of computer software used to manipulate the data.

Results The finding of your study should be written objectively and in a succinct and precise format. In quantitative studies, it is common to use graphs, tables, charts, and other non-textual elements to help the reader understand the data. Make sure that non-textual elements do not stand in isolation from the text but are being used to supplement the overall description of the results and to help clarify key points being made. Further information about how to effectively present data using charts and graphs can be found here .

• Statistical analysis -- how did you analyze the data? What were the key findings from the data? The findings should be present in a logical, sequential order. Describe but do not interpret these trends or negative results; save that for the discussion section. The results should be presented in the past tense.

Discussion Discussions should be analytic, logical, and comprehensive. The discussion should meld together your findings in relation to those identified in the literature review, and placed within the context of the theoretical framework underpinning the study. The discussion should be presented in the present tense.

• Interpretation of results -- reiterate the research problem being investigated and compare and contrast the findings with the research questions underlying the study. Did they affirm predicted outcomes or did the data refute it?
• Description of trends, comparison of groups, or relationships among variables -- describe any trends that emerged from your analysis and explain all unanticipated and statistical insignificant findings.
• Discussion of implications – what is the meaning of your results? Highlight key findings based on the overall results and note findings that you believe are important. How have the results helped fill gaps in understanding the research problem?
• Limitations -- describe any limitations or unavoidable bias in your study and, if necessary, note why these limitations did not inhibit effective interpretation of the results.

Conclusion End your study by to summarizing the topic and provide a final comment and assessment of the study.

• Summary of findings – synthesize the answers to your research questions. Do not report any statistical data here; just provide a narrative summary of the key findings and describe what was learned that you did not know before conducting the study.
• Recommendations – if appropriate to the aim of the assignment, tie key findings with policy recommendations or actions to be taken in practice.
• Future research – note the need for future research linked to your study’s limitations or to any remaining gaps in the literature that were not addressed in your study.

Black, Thomas R. Doing Quantitative Research in the Social Sciences: An Integrated Approach to Research Design, Measurement and Statistics . London: Sage, 1999; Gay,L. R. and Peter Airasain. Educational Research: Competencies for Analysis and Applications . 7th edition. Upper Saddle River, NJ: Merril Prentice Hall, 2003; Hector, Anestine. An Overview of Quantitative Research in Composition and TESOL . Department of English, Indiana University of Pennsylvania; Hopkins, Will G. “Quantitative Research Design.” Sportscience 4, 1 (2000); "A Strategy for Writing Up Research Results. The Structure, Format, Content, and Style of a Journal-Style Scientific Paper." Department of Biology. Bates College; Nenty, H. Johnson. "Writing a Quantitative Research Thesis." International Journal of Educational Science 1 (2009): 19-32; Ouyang, Ronghua (John). Basic Inquiry of Quantitative Research . Kennesaw State University.

Strengths of Using Quantitative Methods

Quantitative researchers try to recognize and isolate specific variables contained within the study framework, seek correlation, relationships and causality, and attempt to control the environment in which the data is collected to avoid the risk of variables, other than the one being studied, accounting for the relationships identified.

Among the specific strengths of using quantitative methods to study social science research problems:

• Allows for a broader study, involving a greater number of subjects, and enhancing the generalization of the results;
• Allows for greater objectivity and accuracy of results. Generally, quantitative methods are designed to provide summaries of data that support generalizations about the phenomenon under study. In order to accomplish this, quantitative research usually involves few variables and many cases, and employs prescribed procedures to ensure validity and reliability;
• Applying well established standards means that the research can be replicated, and then analyzed and compared with similar studies;
• You can summarize vast sources of information and make comparisons across categories and over time; and,
• Personal bias can be avoided by keeping a 'distance' from participating subjects and using accepted computational techniques .

Babbie, Earl R. The Practice of Social Research . 12th ed. Belmont, CA: Wadsworth Cengage, 2010; Brians, Craig Leonard et al. Empirical Political Analysis: Quantitative and Qualitative Research Methods . 8th ed. Boston, MA: Longman, 2011; McNabb, David E. Research Methods in Public Administration and Nonprofit Management: Quantitative and Qualitative Approaches . 2nd ed. Armonk, NY: M.E. Sharpe, 2008; Singh, Kultar. Quantitative Social Research Methods . Los Angeles, CA: Sage, 2007.

Limitations of Using Quantitative Methods

Quantitative methods presume to have an objective approach to studying research problems, where data is controlled and measured, to address the accumulation of facts, and to determine the causes of behavior. As a consequence, the results of quantitative research may be statistically significant but are often humanly insignificant.

Some specific limitations associated with using quantitative methods to study research problems in the social sciences include:

• Quantitative data is more efficient and able to test hypotheses, but may miss contextual detail;
• Uses a static and rigid approach and so employs an inflexible process of discovery;
• The development of standard questions by researchers can lead to "structural bias" and false representation, where the data actually reflects the view of the researcher instead of the participating subject;
• Results provide less detail on behavior, attitudes, and motivation;
• Researcher may collect a much narrower and sometimes superficial dataset;
• Results are limited as they provide numerical descriptions rather than detailed narrative and generally provide less elaborate accounts of human perception;
• The research is often carried out in an unnatural, artificial environment so that a level of control can be applied to the exercise. This level of control might not normally be in place in the real world thus yielding "laboratory results" as opposed to "real world results"; and,
• Preset answers will not necessarily reflect how people really feel about a subject and, in some cases, might just be the closest match to the preconceived hypothesis.

Research Tip

Finding Examples of How to Apply Different Types of Research Methods

SAGE publications is a major publisher of studies about how to design and conduct research in the social and behavioral sciences. Their SAGE Research Methods Online and Cases database includes contents from books, articles, encyclopedias, handbooks, and videos covering social science research design and methods including the complete Little Green Book Series of Quantitative Applications in the Social Sciences and the Little Blue Book Series of Qualitative Research techniques. The database also includes case studies outlining the research methods used in real research projects. This is an excellent source for finding definitions of key terms and descriptions of research design and practice, techniques of data gathering, analysis, and reporting, and information about theories of research [e.g., grounded theory]. The database covers both qualitative and quantitative research methods as well as mixed methods approaches to conducting research.

SAGE Research Methods Online and Cases

• << Previous: Qualitative Methods
• Next: Insiderness >>
• Last Updated: Apr 24, 2024 10:51 AM
• URL: https://libguides.usc.edu/writingguide

• Data Science

Caltech Bootcamp / Blog / /

Data Collection Methods: A Comprehensive View

• Written by John Terra
• Updated on February 21, 2024

Companies that want to be competitive in today’s digital economy enjoy the benefit of countless reams of data available for market research. In fact, thanks to the advent of big data, there’s a veritable tidal wave of information ready to be put to good use, helping businesses make intelligent decisions and thrive.

But before that data can be used, it must be processed. But before it can be processed, it must be collected, and that’s what we’re here for. This article explores the subject of data collection. We will learn about the types of data collection methods and why they are essential.

We will detail primary and secondary data collection methods and discuss data collection procedures. We’ll also share how you can learn practical skills through online data science training.

But first, let’s get the definition out of the way. What is data collection?

What is Data Collection?

Data collection is the act of collecting, measuring and analyzing different kinds of information using a set of validated standard procedures and techniques. The primary objective of data collection procedures is to gather reliable, information-rich data and analyze it to make critical business decisions. Once the desired data is collected, it undergoes a process of data cleaning and processing to make the information actionable and valuable for businesses.

Your choice of data collection method (or alternately called a data gathering procedure) depends on the research questions you’re working on, the type of data required, and the available time and resources and time. You can categorize data-gathering procedures into two main methods:

• Primary data collection . Primary data is collected via first-hand experiences and does not reference or use the past. The data obtained by primary data collection methods is exceptionally accurate and geared to the research’s motive. They are divided into two categories: quantitative and qualitative. We’ll explore the specifics later.
• Secondary data collection. Secondary data is the information that’s been used in the past. The researcher can obtain data from internal and external sources, including organizational data.

Let’s take a closer look at specific examples of both data collection methods.

The Specific Types of Data Collection Methods

As mentioned, primary data collection methods are split into quantitative and qualitative. We will examine each method’s data collection tools separately. Then, we will discuss secondary data collection methods.

Quantitative Methods

Quantitative techniques for demand forecasting and market research typically use statistical tools. When using these techniques, historical data is used to forecast demand. These primary data-gathering procedures are most often used to make long-term forecasts. Statistical analysis methods are highly reliable because they carry minimal subjectivity.

• Barometric Method. Also called the leading indicators approach, data analysts and researchers employ this method to speculate on future trends based on current developments. When past events are used to predict future events, they are considered leading indicators.
• Smoothing Techniques. Smoothing techniques can be used in cases where the time series lacks significant trends. These techniques eliminate random variation from historical demand and help identify demand levels and patterns to estimate future demand. The most popular methods used in these techniques are the simple moving average and the weighted moving average methods.
• Time Series Analysis. The term “time series” refers to the sequential order of values in a variable, also known as a trend, at equal time intervals. Using patterns, organizations can predict customer demand for their products and services during the projected time.

Qualitative Methods

Qualitative data collection methods are instrumental when no historical information is available, or numbers and mathematical calculations aren’t required. Qualitative research is closely linked to words, emotions, sounds, feelings, colors, and other non-quantifiable elements. These techniques rely on experience, conjecture, intuition, judgment, emotion, etc. Quantitative methods do not provide motives behind the participants’ responses. Additionally, they often don’t reach underrepresented populations and usually involve long data collection periods. Therefore, you get the best results using quantitative and qualitative methods together.

• Questionnaires . Questionnaires are a printed set of either open-ended or closed-ended questions. Respondents must answer based on their experience and knowledge of the issue. A questionnaire is a part of a survey, while the questionnaire’s end goal doesn’t necessarily have to be a survey.
• Surveys. Surveys collect data from target audiences, gathering insights into their opinions, preferences, choices, and feedback on the organization’s goods and services. Most survey software has a wide range of question types, or you can also use a ready-made survey template that saves time and effort. Surveys can be distributed via different channels such as e-mail, offline apps, websites, social media, QR codes, etc.

Once researchers collect the data, survey software generates reports and runs analytics algorithms to uncover hidden insights. Survey dashboards give you statistics relating to completion rates, response rates, filters based on demographics, export and sharing options, etc. Practical business intelligence depends on the synergy between analytics and reporting. Analytics uncovers valuable insights while reporting communicates these findings to the stakeholders.

• Polls. Polls consist of one or more multiple-choice questions. Marketers can turn to polls when they want to take a quick snapshot of the audience’s sentiments. Since polls tend to be short, getting people to respond is more manageable. Like surveys, online polls can be embedded into various media and platforms. Once the respondents answer the question(s), they can be shown how they stand concerning other people’s responses.
• Delphi Technique. The name is a callback to the Oracle of Delphi, a priestess at Apollo’s temple in ancient Greece, renowned for her prophecies. In this method, marketing experts are given the forecast estimates and assumptions made by other industry experts. The first batch of experts may then use the information provided by the other experts to revise and reconsider their estimates and assumptions. The total expert consensus on the demand forecasts creates the final demand forecast.
• Interviews. In this method, interviewers talk to the respondents either face-to-face or by telephone. In the first case, the interviewer asks the interviewee a series of questions in person and notes the responses. The interviewer can opt for a telephone interview if the parties cannot meet in person. This data collection form is practical for use with only a few respondents; repeating the same process with a considerably larger group takes longer.
• Focus Groups. Focus groups are one of the primary examples of qualitative data in education. In focus groups, small groups of people, usually around 8-10 members, discuss the research problem’s common aspects. Each person provides their insights on the issue, and a moderator regulates the discussion. When the discussion ends, the group reaches a consensus.

Secondary Data Collection Methods

Secondary data is the information that’s been used in past situations. Secondary data collection methods can include quantitative and qualitative techniques. In addition, secondary data is easily available, so it’s less time-consuming and expensive than using primary data. However, the authenticity of data gathered with secondary data collection tools cannot be verified.

Internal secondary data sources:

• CRM Software
• Executive summaries
• Financial Statements
• Mission and vision statements
• Organization’s health and safety records
• Sales Reports

External secondary data sources:

• Business journals
• Government reports
• Press releases

The Importance of Data Collection Methods

Data collection methods play a critical part in the research process as they determine the accuracy and quality and accuracy of the collected data. Here’s a sample of some reasons why data collection procedures are so important:

• They determine the quality and accuracy of collected data
• They ensure the data and the research findings are valid, relevant and reliable
• They help reduce bias and increase the sample’s representation
• They are crucial for making informed decisions and arriving at accurate conclusions
• They provide accurate data, which facilitates the achievement of research objectives

So, What’s the Difference Between Data Collecting and Data Processing?

Data collection is the first step in the data processing process. Data collection involves gathering information (raw data) from various sources such as interviews, surveys, questionnaires, etc. Data processing describes the steps taken to organize, manipulate and transform the collected data into a useful and meaningful resource. This process may include tasks such as cleaning and validating data, analyzing and summarizing data, and creating visualizations or reports.

So, data collection is just one step in the overall data processing chain of events.

Do You Want to Become a Data Scientist?

If this discussion about data collection and the professionals who conduct it has sparked your enthusiasm for a new career, why not check out this online data science program ?

The Glassdoor.com jobs website shows that data scientists in the United States typically make an average yearly salary of $129,127 plus additional bonuses and cash incentives. So, if you’re interested in a new career or are already in the field but want to upskill or refresh your current skill set, sign up for this bootcamp and prepare to tackle the challenges of today’s big data.

Data Science Bootcamp

• Learning Format:

Online Bootcamp

Leave a comment cancel reply.

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Recommended Articles

Why Use Python for Data Science?

This article explains why you should use Python for data science tasks, including how it’s done and the benefits.

A Beginner’s Guide to the Data Science Process

Data scientists are in high demand today. If you’re considering pursuing a career in this rewarding field, read on to better understand the data science process, tools, roles, and more.

What Is Data Mining? A Beginner’s Guide

This article explores data mining, including the steps involved in the data mining process, data mining tools and applications, and the associated challenges.

What Is Data Processing? Definition, Examples, Trends

This article addresses the question, “What is data processing?” It covers the data processing cycle, types and methods of data processing, and examples.

Navigating Data Scientist Roles and Responsibilities in Today’s Market

Data scientists are in high demand. If the job sounds interesting, read on to learn more about a data scientist’s roles and responsibilities.

Differences Between Data Scientist and Data Analyst: Complete Explanation

The ever-changing world of information technology (IT) has brought us new innovations and ways of doing things and a host of new terms, phrases, and

Learning Format

Program Benefits

• 12+ tools covered, 25+ hands-on projects
• Masterclasses by distinguished Caltech CTME instructors
• Caltech CTME Circle Membership
• Industry-specific training from global experts
• Call us on : 1800-212-7688

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• J Korean Med Sci
• v.37(16); 2022 Apr 25

A Practical Guide to Writing Quantitative and Qualitative Research Questions and Hypotheses in Scholarly Articles

Edward barroga.

1 Department of General Education, Graduate School of Nursing Science, St. Luke’s International University, Tokyo, Japan.

Glafera Janet Matanguihan

2 Department of Biological Sciences, Messiah University, Mechanicsburg, PA, USA.

The development of research questions and the subsequent hypotheses are prerequisites to defining the main research purpose and specific objectives of a study. Consequently, these objectives determine the study design and research outcome. The development of research questions is a process based on knowledge of current trends, cutting-edge studies, and technological advances in the research field. Excellent research questions are focused and require a comprehensive literature search and in-depth understanding of the problem being investigated. Initially, research questions may be written as descriptive questions which could be developed into inferential questions. These questions must be specific and concise to provide a clear foundation for developing hypotheses. Hypotheses are more formal predictions about the research outcomes. These specify the possible results that may or may not be expected regarding the relationship between groups. Thus, research questions and hypotheses clarify the main purpose and specific objectives of the study, which in turn dictate the design of the study, its direction, and outcome. Studies developed from good research questions and hypotheses will have trustworthy outcomes with wide-ranging social and health implications.

INTRODUCTION

Scientific research is usually initiated by posing evidenced-based research questions which are then explicitly restated as hypotheses. 1 , 2 The hypotheses provide directions to guide the study, solutions, explanations, and expected results. 3 , 4 Both research questions and hypotheses are essentially formulated based on conventional theories and real-world processes, which allow the inception of novel studies and the ethical testing of ideas. 5 , 6

It is crucial to have knowledge of both quantitative and qualitative research 2 as both types of research involve writing research questions and hypotheses. 7 However, these crucial elements of research are sometimes overlooked; if not overlooked, then framed without the forethought and meticulous attention it needs. Planning and careful consideration are needed when developing quantitative or qualitative research, particularly when conceptualizing research questions and hypotheses. 4

There is a continuing need to support researchers in the creation of innovative research questions and hypotheses, as well as for journal articles that carefully review these elements. 1 When research questions and hypotheses are not carefully thought of, unethical studies and poor outcomes usually ensue. Carefully formulated research questions and hypotheses define well-founded objectives, which in turn determine the appropriate design, course, and outcome of the study. This article then aims to discuss in detail the various aspects of crafting research questions and hypotheses, with the goal of guiding researchers as they develop their own. Examples from the authors and peer-reviewed scientific articles in the healthcare field are provided to illustrate key points.

DEFINITIONS AND RELATIONSHIP OF RESEARCH QUESTIONS AND HYPOTHESES

A research question is what a study aims to answer after data analysis and interpretation. The answer is written in length in the discussion section of the paper. Thus, the research question gives a preview of the different parts and variables of the study meant to address the problem posed in the research question. 1 An excellent research question clarifies the research writing while facilitating understanding of the research topic, objective, scope, and limitations of the study. 5

On the other hand, a research hypothesis is an educated statement of an expected outcome. This statement is based on background research and current knowledge. 8 , 9 The research hypothesis makes a specific prediction about a new phenomenon 10 or a formal statement on the expected relationship between an independent variable and a dependent variable. 3 , 11 It provides a tentative answer to the research question to be tested or explored. 4

Hypotheses employ reasoning to predict a theory-based outcome. 10 These can also be developed from theories by focusing on components of theories that have not yet been observed. 10 The validity of hypotheses is often based on the testability of the prediction made in a reproducible experiment. 8

Conversely, hypotheses can also be rephrased as research questions. Several hypotheses based on existing theories and knowledge may be needed to answer a research question. Developing ethical research questions and hypotheses creates a research design that has logical relationships among variables. These relationships serve as a solid foundation for the conduct of the study. 4 , 11 Haphazardly constructed research questions can result in poorly formulated hypotheses and improper study designs, leading to unreliable results. Thus, the formulations of relevant research questions and verifiable hypotheses are crucial when beginning research. 12

CHARACTERISTICS OF GOOD RESEARCH QUESTIONS AND HYPOTHESES

Excellent research questions are specific and focused. These integrate collective data and observations to confirm or refute the subsequent hypotheses. Well-constructed hypotheses are based on previous reports and verify the research context. These are realistic, in-depth, sufficiently complex, and reproducible. More importantly, these hypotheses can be addressed and tested. 13

There are several characteristics of well-developed hypotheses. Good hypotheses are 1) empirically testable 7 , 10 , 11 , 13 ; 2) backed by preliminary evidence 9 ; 3) testable by ethical research 7 , 9 ; 4) based on original ideas 9 ; 5) have evidenced-based logical reasoning 10 ; and 6) can be predicted. 11 Good hypotheses can infer ethical and positive implications, indicating the presence of a relationship or effect relevant to the research theme. 7 , 11 These are initially developed from a general theory and branch into specific hypotheses by deductive reasoning. In the absence of a theory to base the hypotheses, inductive reasoning based on specific observations or findings form more general hypotheses. 10

TYPES OF RESEARCH QUESTIONS AND HYPOTHESES

Research questions and hypotheses are developed according to the type of research, which can be broadly classified into quantitative and qualitative research. We provide a summary of the types of research questions and hypotheses under quantitative and qualitative research categories in Table 1 .

Research questions in quantitative research

In quantitative research, research questions inquire about the relationships among variables being investigated and are usually framed at the start of the study. These are precise and typically linked to the subject population, dependent and independent variables, and research design. 1 Research questions may also attempt to describe the behavior of a population in relation to one or more variables, or describe the characteristics of variables to be measured ( descriptive research questions ). 1 , 5 , 14 These questions may also aim to discover differences between groups within the context of an outcome variable ( comparative research questions ), 1 , 5 , 14 or elucidate trends and interactions among variables ( relationship research questions ). 1 , 5 We provide examples of descriptive, comparative, and relationship research questions in quantitative research in Table 2 .

Hypotheses in quantitative research

In quantitative research, hypotheses predict the expected relationships among variables. 15 Relationships among variables that can be predicted include 1) between a single dependent variable and a single independent variable ( simple hypothesis ) or 2) between two or more independent and dependent variables ( complex hypothesis ). 4 , 11 Hypotheses may also specify the expected direction to be followed and imply an intellectual commitment to a particular outcome ( directional hypothesis ) 4 . On the other hand, hypotheses may not predict the exact direction and are used in the absence of a theory, or when findings contradict previous studies ( non-directional hypothesis ). 4 In addition, hypotheses can 1) define interdependency between variables ( associative hypothesis ), 4 2) propose an effect on the dependent variable from manipulation of the independent variable ( causal hypothesis ), 4 3) state a negative relationship between two variables ( null hypothesis ), 4 , 11 , 15 4) replace the working hypothesis if rejected ( alternative hypothesis ), 15 explain the relationship of phenomena to possibly generate a theory ( working hypothesis ), 11 5) involve quantifiable variables that can be tested statistically ( statistical hypothesis ), 11 6) or express a relationship whose interlinks can be verified logically ( logical hypothesis ). 11 We provide examples of simple, complex, directional, non-directional, associative, causal, null, alternative, working, statistical, and logical hypotheses in quantitative research, as well as the definition of quantitative hypothesis-testing research in Table 3 .

Research questions in qualitative research

Unlike research questions in quantitative research, research questions in qualitative research are usually continuously reviewed and reformulated. The central question and associated subquestions are stated more than the hypotheses. 15 The central question broadly explores a complex set of factors surrounding the central phenomenon, aiming to present the varied perspectives of participants. 15

There are varied goals for which qualitative research questions are developed. These questions can function in several ways, such as to 1) identify and describe existing conditions ( contextual research question s); 2) describe a phenomenon ( descriptive research questions ); 3) assess the effectiveness of existing methods, protocols, theories, or procedures ( evaluation research questions ); 4) examine a phenomenon or analyze the reasons or relationships between subjects or phenomena ( explanatory research questions ); or 5) focus on unknown aspects of a particular topic ( exploratory research questions ). 5 In addition, some qualitative research questions provide new ideas for the development of theories and actions ( generative research questions ) or advance specific ideologies of a position ( ideological research questions ). 1 Other qualitative research questions may build on a body of existing literature and become working guidelines ( ethnographic research questions ). Research questions may also be broadly stated without specific reference to the existing literature or a typology of questions ( phenomenological research questions ), may be directed towards generating a theory of some process ( grounded theory questions ), or may address a description of the case and the emerging themes ( qualitative case study questions ). 15 We provide examples of contextual, descriptive, evaluation, explanatory, exploratory, generative, ideological, ethnographic, phenomenological, grounded theory, and qualitative case study research questions in qualitative research in Table 4 , and the definition of qualitative hypothesis-generating research in Table 5 .

Qualitative studies usually pose at least one central research question and several subquestions starting with How or What . These research questions use exploratory verbs such as explore or describe . These also focus on one central phenomenon of interest, and may mention the participants and research site. 15

Hypotheses in qualitative research

Hypotheses in qualitative research are stated in the form of a clear statement concerning the problem to be investigated. Unlike in quantitative research where hypotheses are usually developed to be tested, qualitative research can lead to both hypothesis-testing and hypothesis-generating outcomes. 2 When studies require both quantitative and qualitative research questions, this suggests an integrative process between both research methods wherein a single mixed-methods research question can be developed. 1

FRAMEWORKS FOR DEVELOPING RESEARCH QUESTIONS AND HYPOTHESES

Research questions followed by hypotheses should be developed before the start of the study. 1 , 12 , 14 It is crucial to develop feasible research questions on a topic that is interesting to both the researcher and the scientific community. This can be achieved by a meticulous review of previous and current studies to establish a novel topic. Specific areas are subsequently focused on to generate ethical research questions. The relevance of the research questions is evaluated in terms of clarity of the resulting data, specificity of the methodology, objectivity of the outcome, depth of the research, and impact of the study. 1 , 5 These aspects constitute the FINER criteria (i.e., Feasible, Interesting, Novel, Ethical, and Relevant). 1 Clarity and effectiveness are achieved if research questions meet the FINER criteria. In addition to the FINER criteria, Ratan et al. described focus, complexity, novelty, feasibility, and measurability for evaluating the effectiveness of research questions. 14

The PICOT and PEO frameworks are also used when developing research questions. 1 The following elements are addressed in these frameworks, PICOT: P-population/patients/problem, I-intervention or indicator being studied, C-comparison group, O-outcome of interest, and T-timeframe of the study; PEO: P-population being studied, E-exposure to preexisting conditions, and O-outcome of interest. 1 Research questions are also considered good if these meet the “FINERMAPS” framework: Feasible, Interesting, Novel, Ethical, Relevant, Manageable, Appropriate, Potential value/publishable, and Systematic. 14

As we indicated earlier, research questions and hypotheses that are not carefully formulated result in unethical studies or poor outcomes. To illustrate this, we provide some examples of ambiguous research question and hypotheses that result in unclear and weak research objectives in quantitative research ( Table 6 ) 16 and qualitative research ( Table 7 ) 17 , and how to transform these ambiguous research question(s) and hypothesis(es) into clear and good statements.

a These statements were composed for comparison and illustrative purposes only.

b These statements are direct quotes from Higashihara and Horiuchi. 16

a This statement is a direct quote from Shimoda et al. 17

The other statements were composed for comparison and illustrative purposes only.

CONSTRUCTING RESEARCH QUESTIONS AND HYPOTHESES

To construct effective research questions and hypotheses, it is very important to 1) clarify the background and 2) identify the research problem at the outset of the research, within a specific timeframe. 9 Then, 3) review or conduct preliminary research to collect all available knowledge about the possible research questions by studying theories and previous studies. 18 Afterwards, 4) construct research questions to investigate the research problem. Identify variables to be accessed from the research questions 4 and make operational definitions of constructs from the research problem and questions. Thereafter, 5) construct specific deductive or inductive predictions in the form of hypotheses. 4 Finally, 6) state the study aims . This general flow for constructing effective research questions and hypotheses prior to conducting research is shown in Fig. 1 .

Research questions are used more frequently in qualitative research than objectives or hypotheses. 3 These questions seek to discover, understand, explore or describe experiences by asking “What” or “How.” The questions are open-ended to elicit a description rather than to relate variables or compare groups. The questions are continually reviewed, reformulated, and changed during the qualitative study. 3 Research questions are also used more frequently in survey projects than hypotheses in experiments in quantitative research to compare variables and their relationships.

Hypotheses are constructed based on the variables identified and as an if-then statement, following the template, ‘If a specific action is taken, then a certain outcome is expected.’ At this stage, some ideas regarding expectations from the research to be conducted must be drawn. 18 Then, the variables to be manipulated (independent) and influenced (dependent) are defined. 4 Thereafter, the hypothesis is stated and refined, and reproducible data tailored to the hypothesis are identified, collected, and analyzed. 4 The hypotheses must be testable and specific, 18 and should describe the variables and their relationships, the specific group being studied, and the predicted research outcome. 18 Hypotheses construction involves a testable proposition to be deduced from theory, and independent and dependent variables to be separated and measured separately. 3 Therefore, good hypotheses must be based on good research questions constructed at the start of a study or trial. 12

In summary, research questions are constructed after establishing the background of the study. Hypotheses are then developed based on the research questions. Thus, it is crucial to have excellent research questions to generate superior hypotheses. In turn, these would determine the research objectives and the design of the study, and ultimately, the outcome of the research. 12 Algorithms for building research questions and hypotheses are shown in Fig. 2 for quantitative research and in Fig. 3 for qualitative research.

EXAMPLES OF RESEARCH QUESTIONS FROM PUBLISHED ARTICLES

• EXAMPLE 1. Descriptive research question (quantitative research)
• - Presents research variables to be assessed (distinct phenotypes and subphenotypes)
• “BACKGROUND: Since COVID-19 was identified, its clinical and biological heterogeneity has been recognized. Identifying COVID-19 phenotypes might help guide basic, clinical, and translational research efforts.
• RESEARCH QUESTION: Does the clinical spectrum of patients with COVID-19 contain distinct phenotypes and subphenotypes? ” 19
• EXAMPLE 2. Relationship research question (quantitative research)
• - Shows interactions between dependent variable (static postural control) and independent variable (peripheral visual field loss)
• “Background: Integration of visual, vestibular, and proprioceptive sensations contributes to postural control. People with peripheral visual field loss have serious postural instability. However, the directional specificity of postural stability and sensory reweighting caused by gradual peripheral visual field loss remain unclear.
• Research question: What are the effects of peripheral visual field loss on static postural control ?” 20
• EXAMPLE 3. Comparative research question (quantitative research)
• - Clarifies the difference among groups with an outcome variable (patients enrolled in COMPERA with moderate PH or severe PH in COPD) and another group without the outcome variable (patients with idiopathic pulmonary arterial hypertension (IPAH))
• “BACKGROUND: Pulmonary hypertension (PH) in COPD is a poorly investigated clinical condition.
• RESEARCH QUESTION: Which factors determine the outcome of PH in COPD?
• STUDY DESIGN AND METHODS: We analyzed the characteristics and outcome of patients enrolled in the Comparative, Prospective Registry of Newly Initiated Therapies for Pulmonary Hypertension (COMPERA) with moderate or severe PH in COPD as defined during the 6th PH World Symposium who received medical therapy for PH and compared them with patients with idiopathic pulmonary arterial hypertension (IPAH) .” 21
• EXAMPLE 4. Exploratory research question (qualitative research)
• - Explores areas that have not been fully investigated (perspectives of families and children who receive care in clinic-based child obesity treatment) to have a deeper understanding of the research problem
• “Problem: Interventions for children with obesity lead to only modest improvements in BMI and long-term outcomes, and data are limited on the perspectives of families of children with obesity in clinic-based treatment. This scoping review seeks to answer the question: What is known about the perspectives of families and children who receive care in clinic-based child obesity treatment? This review aims to explore the scope of perspectives reported by families of children with obesity who have received individualized outpatient clinic-based obesity treatment.” 22
• EXAMPLE 5. Relationship research question (quantitative research)
• - Defines interactions between dependent variable (use of ankle strategies) and independent variable (changes in muscle tone)
• “Background: To maintain an upright standing posture against external disturbances, the human body mainly employs two types of postural control strategies: “ankle strategy” and “hip strategy.” While it has been reported that the magnitude of the disturbance alters the use of postural control strategies, it has not been elucidated how the level of muscle tone, one of the crucial parameters of bodily function, determines the use of each strategy. We have previously confirmed using forward dynamics simulations of human musculoskeletal models that an increased muscle tone promotes the use of ankle strategies. The objective of the present study was to experimentally evaluate a hypothesis: an increased muscle tone promotes the use of ankle strategies. Research question: Do changes in the muscle tone affect the use of ankle strategies ?” 23

EXAMPLES OF HYPOTHESES IN PUBLISHED ARTICLES

• EXAMPLE 1. Working hypothesis (quantitative research)
• - A hypothesis that is initially accepted for further research to produce a feasible theory
• “As fever may have benefit in shortening the duration of viral illness, it is plausible to hypothesize that the antipyretic efficacy of ibuprofen may be hindering the benefits of a fever response when taken during the early stages of COVID-19 illness .” 24
• “In conclusion, it is plausible to hypothesize that the antipyretic efficacy of ibuprofen may be hindering the benefits of a fever response . The difference in perceived safety of these agents in COVID-19 illness could be related to the more potent efficacy to reduce fever with ibuprofen compared to acetaminophen. Compelling data on the benefit of fever warrant further research and review to determine when to treat or withhold ibuprofen for early stage fever for COVID-19 and other related viral illnesses .” 24
• EXAMPLE 2. Exploratory hypothesis (qualitative research)
• - Explores particular areas deeper to clarify subjective experience and develop a formal hypothesis potentially testable in a future quantitative approach
• “We hypothesized that when thinking about a past experience of help-seeking, a self distancing prompt would cause increased help-seeking intentions and more favorable help-seeking outcome expectations .” 25
• “Conclusion
• Although a priori hypotheses were not supported, further research is warranted as results indicate the potential for using self-distancing approaches to increasing help-seeking among some people with depressive symptomatology.” 25
• EXAMPLE 3. Hypothesis-generating research to establish a framework for hypothesis testing (qualitative research)
• “We hypothesize that compassionate care is beneficial for patients (better outcomes), healthcare systems and payers (lower costs), and healthcare providers (lower burnout). ” 26
• Compassionomics is the branch of knowledge and scientific study of the effects of compassionate healthcare. Our main hypotheses are that compassionate healthcare is beneficial for (1) patients, by improving clinical outcomes, (2) healthcare systems and payers, by supporting financial sustainability, and (3) HCPs, by lowering burnout and promoting resilience and well-being. The purpose of this paper is to establish a scientific framework for testing the hypotheses above . If these hypotheses are confirmed through rigorous research, compassionomics will belong in the science of evidence-based medicine, with major implications for all healthcare domains.” 26
• EXAMPLE 4. Statistical hypothesis (quantitative research)
• - An assumption is made about the relationship among several population characteristics ( gender differences in sociodemographic and clinical characteristics of adults with ADHD ). Validity is tested by statistical experiment or analysis ( chi-square test, Students t-test, and logistic regression analysis)
• “Our research investigated gender differences in sociodemographic and clinical characteristics of adults with ADHD in a Japanese clinical sample. Due to unique Japanese cultural ideals and expectations of women's behavior that are in opposition to ADHD symptoms, we hypothesized that women with ADHD experience more difficulties and present more dysfunctions than men . We tested the following hypotheses: first, women with ADHD have more comorbidities than men with ADHD; second, women with ADHD experience more social hardships than men, such as having less full-time employment and being more likely to be divorced.” 27
• “Statistical Analysis
• ( text omitted ) Between-gender comparisons were made using the chi-squared test for categorical variables and Students t-test for continuous variables…( text omitted ). A logistic regression analysis was performed for employment status, marital status, and comorbidity to evaluate the independent effects of gender on these dependent variables.” 27

EXAMPLES OF HYPOTHESIS AS WRITTEN IN PUBLISHED ARTICLES IN RELATION TO OTHER PARTS

• EXAMPLE 1. Background, hypotheses, and aims are provided
• “Pregnant women need skilled care during pregnancy and childbirth, but that skilled care is often delayed in some countries …( text omitted ). The focused antenatal care (FANC) model of WHO recommends that nurses provide information or counseling to all pregnant women …( text omitted ). Job aids are visual support materials that provide the right kind of information using graphics and words in a simple and yet effective manner. When nurses are not highly trained or have many work details to attend to, these job aids can serve as a content reminder for the nurses and can be used for educating their patients (Jennings, Yebadokpo, Affo, & Agbogbe, 2010) ( text omitted ). Importantly, additional evidence is needed to confirm how job aids can further improve the quality of ANC counseling by health workers in maternal care …( text omitted )” 28
• “ This has led us to hypothesize that the quality of ANC counseling would be better if supported by job aids. Consequently, a better quality of ANC counseling is expected to produce higher levels of awareness concerning the danger signs of pregnancy and a more favorable impression of the caring behavior of nurses .” 28
• “This study aimed to examine the differences in the responses of pregnant women to a job aid-supported intervention during ANC visit in terms of 1) their understanding of the danger signs of pregnancy and 2) their impression of the caring behaviors of nurses to pregnant women in rural Tanzania.” 28
• EXAMPLE 2. Background, hypotheses, and aims are provided
• “We conducted a two-arm randomized controlled trial (RCT) to evaluate and compare changes in salivary cortisol and oxytocin levels of first-time pregnant women between experimental and control groups. The women in the experimental group touched and held an infant for 30 min (experimental intervention protocol), whereas those in the control group watched a DVD movie of an infant (control intervention protocol). The primary outcome was salivary cortisol level and the secondary outcome was salivary oxytocin level.” 29
• “ We hypothesize that at 30 min after touching and holding an infant, the salivary cortisol level will significantly decrease and the salivary oxytocin level will increase in the experimental group compared with the control group .” 29
• EXAMPLE 3. Background, aim, and hypothesis are provided
• “In countries where the maternal mortality ratio remains high, antenatal education to increase Birth Preparedness and Complication Readiness (BPCR) is considered one of the top priorities [1]. BPCR includes birth plans during the antenatal period, such as the birthplace, birth attendant, transportation, health facility for complications, expenses, and birth materials, as well as family coordination to achieve such birth plans. In Tanzania, although increasing, only about half of all pregnant women attend an antenatal clinic more than four times [4]. Moreover, the information provided during antenatal care (ANC) is insufficient. In the resource-poor settings, antenatal group education is a potential approach because of the limited time for individual counseling at antenatal clinics.” 30
• “This study aimed to evaluate an antenatal group education program among pregnant women and their families with respect to birth-preparedness and maternal and infant outcomes in rural villages of Tanzania.” 30
• “ The study hypothesis was if Tanzanian pregnant women and their families received a family-oriented antenatal group education, they would (1) have a higher level of BPCR, (2) attend antenatal clinic four or more times, (3) give birth in a health facility, (4) have less complications of women at birth, and (5) have less complications and deaths of infants than those who did not receive the education .” 30

Research questions and hypotheses are crucial components to any type of research, whether quantitative or qualitative. These questions should be developed at the very beginning of the study. Excellent research questions lead to superior hypotheses, which, like a compass, set the direction of research, and can often determine the successful conduct of the study. Many research studies have floundered because the development of research questions and subsequent hypotheses was not given the thought and meticulous attention needed. The development of research questions and hypotheses is an iterative process based on extensive knowledge of the literature and insightful grasp of the knowledge gap. Focused, concise, and specific research questions provide a strong foundation for constructing hypotheses which serve as formal predictions about the research outcomes. Research questions and hypotheses are crucial elements of research that should not be overlooked. They should be carefully thought of and constructed when planning research. This avoids unethical studies and poor outcomes by defining well-founded objectives that determine the design, course, and outcome of the study.

Disclosure: The authors have no potential conflicts of interest to disclose.

Author Contributions:

• Conceptualization: Barroga E, Matanguihan GJ.
• Methodology: Barroga E, Matanguihan GJ.
• Writing - original draft: Barroga E, Matanguihan GJ.
• Writing - review & editing: Barroga E, Matanguihan GJ.

Chapter 10. Introduction to Data Collection Techniques

Introduction.

Now that we have discussed various aspects of qualitative research, we can begin to collect data. This chapter serves as a bridge between the first half and second half of this textbook (and perhaps your course) by introducing techniques of data collection. You’ve already been introduced to some of this because qualitative research is often characterized by the form of data collection; for example, an ethnographic study is one that employs primarily observational data collection for the purpose of documenting and presenting a particular culture or ethnos. Thus, some of this chapter will operate as a review of material already covered, but we will be approaching it from the data-collection side rather than the tradition-of-inquiry side we explored in chapters 2 and 4.

Revisiting Approaches

There are four primary techniques of data collection used in qualitative research: interviews, focus groups, observations, and document review. [1] There are other available techniques, such as visual analysis (e.g., photo elicitation) and biography (e.g., autoethnography) that are sometimes used independently or supplementarily to one of the main forms. Not to confuse you unduly, but these various data collection techniques are employed differently by different qualitative research traditions so that sometimes the technique and the tradition become inextricably entwined. This is largely the case with observations and ethnography. The ethnographic tradition is fundamentally based on observational techniques. At the same time, traditions other than ethnography also employ observational techniques, so it is worthwhile thinking of “tradition” and “technique” separately (see figure 10.1).

Figure 10.1. Data Collection Techniques

Each of these data collection techniques will be the subject of its own chapter in the second half of this textbook. This chapter serves as an orienting overview and as the bridge between the conceptual/design portion of qualitative research and the actual practice of conducting qualitative research.

Overview of the Four Primary Approaches

Interviews are at the heart of qualitative research. Returning to epistemological foundations, it is during the interview that the researcher truly opens herself to hearing what others have to say, encouraging her interview subjects to reflect deeply on the meanings and values they hold. Interviews are used in almost every qualitative tradition but are particularly salient in phenomenological studies, studies seeking to understand the meaning of people’s lived experiences.

Focus groups can be seen as a type of interview, one in which a group of persons (ideally between five and twelve) is asked a series of questions focused on a particular topic or subject. They are sometimes used as the primary form of data collection, especially outside academic research. For example, businesses often employ focus groups to determine if a particular product is likely to sell. Among qualitative researchers, it is often used in conjunction with any other primary data collection technique as a form of “triangulation,” or a way of increasing the reliability of the study by getting at the object of study from multiple directions. [2] Some traditions, such as feminist approaches, also see the focus group as an important “consciousness-raising” tool.

If interviews are at the heart of qualitative research, observations are its lifeblood. Researchers who are more interested in the practices and behaviors of people than what they think or who are trying to understand the parameters of an organizational culture rely on observations as their primary form of data collection. The notes they make “in the field” (either during observations or afterward) form the “data” that will be analyzed. Ethnographers, those seeking to describe a particular ethnos, or culture, believe that observations are more reliable guides to that culture than what people have to say about it. Observations are thus the primary form of data collection for ethnographers, albeit often supplemented with in-depth interviews.

Some would say that these three—interviews, focus groups, and observations—are really the foundational techniques of data collection. They are far and away the three techniques most frequently used separately, in conjunction with one another, and even sometimes in mixed methods qualitative/quantitative studies. Document review, either as a form of content analysis or separately, however, is an important addition to the qualitative researcher’s toolkit and should not be overlooked (figure 10.1). Although it is rare for a qualitative researcher to make document review their primary or sole form of data collection, including documents in the research design can help expand the reach and the reliability of a study. Document review can take many forms, from historical and archival research, in which the researcher pieces together a narrative of the past by finding and analyzing a variety of “documents” and records (including photographs and physical artifacts), to analyses of contemporary media content, as in the case of compiling and coding blog posts or other online commentaries, and content analysis that identifies and describes communicative aspects of media or documents.

In addition to these four major techniques, there are a host of emerging and incidental data collection techniques, from photo elicitation or photo voice, in which respondents are asked to comment upon a photograph or image (particularly useful as a supplement to interviews when the respondents are hesitant or unable to answer direct questions), to autoethnographies, in which the researcher uses his own position and life to increase our understanding about a phenomenon and its historical and social context.

Taken together, these techniques provide a wide range of practices and tools with which to discover the world. They are particularly suited to addressing the questions that qualitative researchers ask—questions about how things happen and why people act the way they do, given particular social contexts and shared meanings about the world (chapter 4).

Triangulation and Mixed Methods

Because the researcher plays such a large and nonneutral role in qualitative research, one that requires constant reflectivity and awareness (chapter 6), there is a constant need to reassure her audience that the results she finds are reliable. Quantitative researchers can point to any number of measures of statistical significance to reassure their audiences, but qualitative researchers do not have math to hide behind. And she will also want to reassure herself that what she is hearing in her interviews or observing in the field is a true reflection of what is going on (or as “true” as possible, given the problem that the world is as large and varied as the elephant; see chapter 3). For those reasons, it is common for researchers to employ more than one data collection technique or to include multiple and comparative populations, settings, and samples in the research design (chapter 2). A single set of interviews or initial comparison of focus groups might be conceived as a “pilot study” from which to launch the actual study. Undergraduate students working on a research project might be advised to think about their projects in this way as well. You are simply not going to have enough time or resources as an undergraduate to construct and complete a successful qualitative research project, but you may be able to tackle a pilot study. Graduate students also need to think about the amount of time and resources they have for completing a full study. Masters-level students, or students who have one year or less in which to complete a program, should probably consider their study as an initial exploratory pilot. PhD candidates might have the time and resources to devote to the type of triangulated, multifaceted research design called for by the research question.

We call the use of multiple qualitative methods of data collection and the inclusion of multiple and comparative populations and settings “triangulation.” Using different data collection methods allows us to check the consistency of our findings. For example, a study of the vaccine hesitant might include a set of interviews with vaccine-hesitant people and a focus group of the same and a content analysis of online comments about a vaccine mandate. By employing all three methods, we can be more confident of our interpretations from the interviews alone (especially if we are hearing the same thing throughout; if we are not, then this is a good sign that we need to push a little further to find out what is really going on). [3] Methodological triangulation is an important tool for increasing the reliability of our findings and the overall success of our research.

Methodological triangulation should not be confused with mixed methods techniques, which refer instead to the combining of qualitative and quantitative research methods. Mixed methods studies can increase reliability, but that is not their primary purpose. Mixed methods address multiple research questions, both the “how many” and “why” kind, or the causal and explanatory kind. Mixed methods will be discussed in more detail in chapter 15.

Let us return to the three examples of qualitative research described in chapter 1: Cory Abramson’s study of aging ( The End Game) , Jennifer Pierce’s study of lawyers and discrimination ( Racing for Innocence ), and my own study of liberal arts college students ( Amplified Advantage ). Each of these studies uses triangulation.

Abramson’s book is primarily based on three years of observations in four distinct neighborhoods. He chose the neighborhoods in such a way to maximize his ability to make comparisons: two were primarily middle class and two were primarily poor; further, within each set, one was predominantly White, while the other was either racially diverse or primarily African American. In each neighborhood, he was present in senior centers, doctors’ offices, public transportation, and other public spots where the elderly congregated. [4] The observations are the core of the book, and they are richly written and described in very moving passages. But it wasn’t enough for him to watch the seniors. He also engaged with them in casual conversation. That, too, is part of fieldwork. He sometimes even helped them make it to the doctor’s office or get around town. Going beyond these interactions, he also interviewed sixty seniors, an equal amount from each of the four neighborhoods. It was in the interviews that he could ask more detailed questions about their lives, what they thought about aging, what it meant to them to be considered old, and what their hopes and frustrations were. He could see that those living in the poor neighborhoods had a more difficult time accessing care and resources than those living in the more affluent neighborhoods, but he couldn’t know how the seniors understood these difficulties without interviewing them. Both forms of data collection supported each other and helped make the study richer and more insightful. Interviews alone would have failed to demonstrate the very real differences he observed (and that some seniors would not even have known about). This is the value of methodological triangulation.

Pierce’s book relies on two separate forms of data collection—interviews with lawyers at a firm that has experienced a history of racial discrimination and content analyses of news stories and popular films that screened during the same years of the alleged racial discrimination. I’ve used this book when teaching methods and have often found students struggle with understanding why these two forms of data collection were used. I think this is because we don’t teach students to appreciate or recognize “popular films” as a legitimate form of data. But what Pierce does is interesting and insightful in the best tradition of qualitative research. Here is a description of the content analyses from a review of her book:

In the chapter on the news media, Professor Pierce uses content analysis to argue that the media not only helped shape the meaning of affirmative action, but also helped create white males as a class of victims. The overall narrative that emerged from these media accounts was one of white male innocence and victimization. She also maintains that this narrative was used to support “neoconservative and neoliberal political agendas” (p. 21). The focus of these articles tended to be that affirmative action hurt white working-class and middle-class men particularly during the recession in the 1980s (despite statistical evidence that people of color were hurt far more than white males by the recession). In these stories fairness and innocence were seen in purely individual terms. Although there were stories that supported affirmative action and developed a broader understanding of fairness, the total number of stories slanted against affirmative action from 1990 to 1999. During that time period negative stories always outnumbered those supporting the policy, usually by a ratio of 3:1 or 3:2. Headlines, the presentation of polling data, and an emphasis in stories on racial division, Pierce argues, reinforced the story of white male victimization. Interestingly, the news media did very few stories on gender and affirmative action. The chapter on the film industry from 1989 to 1999 reinforces Pierce’s argument and adds another layer to her interpretation of affirmative action during this time period. She sampled almost 60 Hollywood films with receipts ranging from four million to 184 million dollars. In this chapter she argues that the dominant theme of these films was racial progress and the redemption of white Americans from past racism. These movies usually portrayed white, elite, and male experiences. People of color were background figures who supported the protagonist and “anointed” him as a savior (p. 45). Over the course of the film the protagonists move from “innocence to consciousness” concerning racism. The antagonists in these films most often were racist working-class white men. A Time to Kill , Mississippi Burning , Amistad , Ghosts of Mississippi , The Long Walk Home , To Kill a Mockingbird , and Dances with Wolves receive particular analysis in this chapter, and her examination of them leads Pierce to conclude that they infused a myth of racial progress into America’s cultural memory. White experiences of race are the focus and contemporary forms of racism are underplayed or omitted. Further, these films stereotype both working-class and elite white males, and underscore the neoliberal emphasis on individualism. ( Hrezo 2012 )

With that context in place, Pierce then turned to interviews with attorneys. She finds that White male attorneys often misremembered facts about the period in which the law firm was accused of racial discrimination and that they often portrayed their firms as having made substantial racial progress. This was in contrast to many of the lawyers of color and female lawyers who remembered the history differently and who saw continuing examples of racial (and gender) discrimination at the law firm. In most of the interviews, people talked about individuals, not structure (and these are attorneys, who really should know better!). By including both content analyses and interviews in her study, Pierce is better able to situate the attorney narratives and explain the larger context for the shared meanings of individual innocence and racial progress. Had this been a study only of films during this period, we would not know how actual people who lived during this period understood the decisions they made; had we had only the interviews, we would have missed the historical context and seen a lot of these interviewees as, well, not very nice people at all. Together, we have a study that is original, inventive, and insightful.

My own study of how class background affects the experiences and outcomes of students at small liberal arts colleges relies on mixed methods and triangulation. At the core of the book is an original survey of college students across the US. From analyses of this survey, I can present findings on “how many” questions and descriptive statistics comparing students of different social class backgrounds. For example, I know and can demonstrate that working-class college students are less likely to go to graduate school after college than upper-class college students are. I can even give you some estimates of the class gap. But what I can’t tell you from the survey is exactly why this is so or how it came to be so . For that, I employ interviews, focus groups, document reviews, and observations. Basically, I threw the kitchen sink at the “problem” of class reproduction and higher education (i.e., Does college reduce class inequalities or make them worse?). A review of historical documents provides a picture of the place of the small liberal arts college in the broader social and historical context. Who had access to these colleges and for what purpose have always been in contest, with some groups attempting to exclude others from opportunities for advancement. What it means to choose a small liberal arts college in the early twenty-first century is thus different for those whose parents are college professors, for those whose parents have a great deal of money, and for those who are the first in their family to attend college. I was able to get at these different understandings through interviews and focus groups and to further delineate the culture of these colleges by careful observation (and my own participation in them, as both former student and current professor). Putting together individual meanings, student dispositions, organizational culture, and historical context allowed me to present a story of how exactly colleges can both help advance first-generation, low-income, working-class college students and simultaneously amplify the preexisting advantages of their peers. Mixed methods addressed multiple research questions, while triangulation allowed for this deeper, more complex story to emerge.

In the next few chapters, we will explore each of the primary data collection techniques in much more detail. As we do so, think about how these techniques may be productively joined for more reliable and deeper studies of the social world.

Advanced Reading: Triangulation

Denzin ( 1978 ) identified four basic types of triangulation: data, investigator, theory, and methodological. Properly speaking, if we use the Denzin typology, the use of multiple methods of data collection and analysis to strengthen one’s study is really a form of methodological triangulation. It may be helpful to understand how this differs from the other types.

Data triangulation occurs when the researcher uses a variety of sources in a single study. Perhaps they are interviewing multiple samples of college students. Obviously, this overlaps with sample selection (see chapter 5). It is helpful for the researcher to understand that these multiple data sources add strength and reliability to the study. After all, it is not just “these students here” but also “those students over there” that are experiencing this phenomenon in a particular way.

Investigator triangulation occurs when different researchers or evaluators are part of the research team. Intercoding reliability is a form of investigator triangulation (or at least a way of leveraging the power of multiple researchers to raise the reliability of the study).

Theory triangulation is the use of multiple perspectives to interpret a single set of data, as in the case of competing theoretical paradigms (e.g., a human capital approach vs. a Bourdieusian multiple capital approach).

Methodological triangulation , as explained in this chapter, is the use of multiple methods to study a single phenomenon, issue, or problem.

Further Readings

Carter, Nancy, Denise Bryant-Lukosius, Alba DiCenso, Jennifer Blythe, Alan J. Neville. 2014. “The Use of Triangulation in Qualitative Research.” Oncology Nursing Forum 41(5):545–547. Discusses the four types of triangulation identified by Denzin with an example of the use of focus groups and in-depth individuals.

Mathison, Sandra. 1988. “Why Triangulate?” Educational Researcher 17(2):13–17. Presents three particular ways of assessing validity through the use of triangulated data collection: convergence, inconsistency, and contradiction.

Tracy, Sarah J. 2010. “Qualitative Quality: Eight ‘Big-Tent’ Criteria for Excellent Qualitative Research.” Qualitative Inquiry 16(10):837–851. Focuses on triangulation as a criterion for conducting valid qualitative research.

• Marshall and Rossman ( 2016 ) state this slightly differently. They list four primary methods for gathering information: (1) participating in the setting, (2) observing directly, (3) interviewing in depth, and (4) analyzing documents and material culture (141). An astute reader will note that I have collapsed participation into observation and that I have distinguished focus groups from interviews. I suspect that this distinction marks me as more of an interview-based researcher, while Marshall and Rossman prioritize ethnographic approaches. The main point of this footnote is to show you, the reader, that there is no single agreed-upon number of approaches to collecting qualitative data. ↵
• See “ Advanced Reading: Triangulation ” at end of this chapter. ↵
• We can also think about triangulating the sources, as when we include comparison groups in our sample (e.g., if we include those receiving vaccines, we might find out a bit more about where the real differences lie between them and the vaccine hesitant); triangulating the analysts (building a research team so that your interpretations can be checked against those of others on the team); and even triangulating the theoretical perspective (as when we “try on,” say, different conceptualizations of social capital in our analyses). ↵

Introduction to Qualitative Research Methods Copyright © 2023 by Allison Hurst is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License , except where otherwise noted.